General HPLC Accessories
SHIMADZU SCIENTIFIC INS (3P ONLY) MARVELX TUBING 100UM ID X 70MM
NC3566291 MARVELX TUBING 100UM ID X 70MM
Waters Corp PATROL Sample Manager Priming Kit
This priming kit is designed for use with the PATROL Sample Manager (PSM) to facilitate the priming process. It is an essential component for the proper operation and maintenance of the ACQUITY UPLC Process Sample Manager system.
- Used to prime the Process Sample Manager (PSM)
- Facilitates the priming process
- Essential component for proper operation and maintenance
- Designed for use with the ACQUITY UPLC Process Sample Manager system
Waters Corp CORTECS Phenyl Method Validation Kit, 90Å, 2.7 μm, 2.1 mm × 150 mm, 3/pk
Waters CORTECS Phenyl Method Validation Kit, 90Å, 2.7 μm, 2.1 mm × 150 mm, 3/pk
Waters Corp Performance Maintenance Kit, ACQUITY I-Class PLUS Sample Manager, Flow Through Needle
The Waters™ Performance Maintenance Kit for the ACQUITY I-Class PLUS Sample Manager – Flow Through Needle contains all the Waters Quality Parts™ necessary to keep the instrument operating at peak performance on an annual basis. The kit includes a syringe, standard needle, needle seat, injection cartridge, and filters.
- Maintains ACQUITY I-Class PLUS Sample Manager – Flow Through Needle
- Ensures peak instrument performance
- Includes syringe, standard needle, needle seat, injection cartridge, and filters
- Recommended for annual replacement
Waters Corp CORTECS C18 Method Validation Kit, 90à , 2.7 µm, 3 mm X 50 mm, 3/pk
CORTECS C18 Method Validation Kit, 90à , 2.7 µm, 3 mm X 50 mm, 3/pk
Waters Corp Method Validation Kit, C18, 90Å Pore Size, 2.7 μm Particle Size, 3 mm x 30 mm
CORTECS C18 Columns are general purpose, high-efficiency columns based on a solid-core particle that offer balanced retention of acids, bases and neutrals at low and mid-range pH.
- High-efficiency columns provide efficient separations.
- Solid-core particle technology contributes to high efficiency.
- Balanced retention offers balanced retention for acids, bases, and neutrals.
- Versatile pH range is effective at low and mid-range pH conditions.
Waters Corp HPLC Column, CORTECS Shield RP18 MV-Kit, 100 mm, 4.6 mm ID, 2.7 μm
This CORTECS Shield RP18 Method Validation Kit provides HPLC columns designed for reversed phase applications. These columns are 100 mm long, with a 4.6 mm inner diameter, and a 2.7 μm particle size, offering precise separation for analytical needs.
- Cortecs column description
- C18 (RP18, ODS, Octadecyl) package specification
- Inner diameter of 4.6 mm
- Reversed Phase (RP) mode
- Particle size of 2.7 μm
- Pore size of 90 Å
- Length of 100 mm
- L1 2 to 8 pH range
- Low silanol activity
- 100 m2/g surface area
- Endcapped
- Spherical particle shape
- Supplied as a 3-pack kit
Waters Corp CORTECS C18 Method Validation Kit, 90Å, 2.7 μm, 2.1 X 75 mm
These columns are general purpose, high-efficiency columns based on a solid-core particle, designed to offer balanced retention of acids, bases, and neutrals across low and mid-range pH conditions.
- Chemistry: C18
- Separation mode: Reversed-phase
- Particle substrate: Silica
- pH range: 2 to 8 pH
- Maximum pressure: 18000 psi (1240 bar)
- Endcapped: Yes
- Silanol activity: Low
- Particle shape: Spherical
- Particle size: 2.7 μm
- Endfitting type: Parker-style
- Pore size: 90 Å
- Format: Method validation kit
- Surface area: 100
- System compatibility: HPLC
- Particle technology: Solid-core
- USP classification: L1
- Internal diameter: 2.1 mm
- Length: 75 mm
- Carbon load: 6.6 %
- eCord: Yes
- Units per package: 3 pk
Waters Corp CORTECS C8 Method Validation Kit, 90Å, 1.6 μm
CORTECS C8 method validation kits provide columns of three different batches. These columns are used for general purpose method development under low pH test conditions. The C8 ligand is less hydrophobic and therefore less retentive compared to C18 phases.
- Chemistry: C8
- Separation mode: Reversed Phase
- pH range: 2 to 8
- Maximum pressure: 18000 psi (1240 Bar)
- Particle size: 1.6 μm
- Pore size: 90 Å
- System compatibility: UPLC, UHPLC
- Particle technology: Solid Core
- Inner diameter: 2.1 mm
- Length: 75 mm
- Units per package: 3
Waters Corp ACQUITY CM-A Tubing Kit, 6 Column, MP35N
This tubing kit provides MP35N tubing assemblies for implementing CM-A active column managers onto a Bio H-Class PLUS system, supporting a six-column configuration. It also serves as a replacement for all MP35N tubing in this setup and includes the necessary Active Preheater for PLUS systems.
- Designed for CM-A active column managers
- Supports a six-column configuration
- Includes MP35N tubing assemblies
- Can replace MP35N tubing in compatible configurations
- Includes an Active Preheater for PLUS systems
- Compatible with UPLC H-Class, I-Class, and M-Class systems
- Replacement as required
- UPLC ASM component included
Waters Corp CORTECS Shield RP18 Method Validation Kit, 90à , 2.7 µm, 3 mm X 50 mm, 3/pk
CORTECS Shield RP18 Method Validation Kit, 90à , 2.7 µm, 3 mm X 50 mm, 3/pk
Waters Corp CORTECS C8 Method Validation Kit, 90à , 2.7 µm, 4.6 mm X 100 mm, 3/pk
CORTECS C8 Method Validation Kit, 90à , 2.7 µm, 4.6 mm X 100 mm, 3/pk
Waters Corp CORTECS C18+ Column, 2.7 μm, 4.6 mm ID, 30 mm Length, Method Validation Kit
CORTECS C18+ columns are general purpose, charged surface, high efficiency C18 columns based on a solid-core particle that is designed to deliver excellent peak shape for basic analytes at low pH.
- Reversed-phase separation mode.
- Silica particle substrate.
- pH range of 2 to 8.
- Temperature limits of 45 °C.
- Maximum pressure of 18000 psi (1240 Bar).
- Endcapped for enhanced performance.
- C18+ bonding technology.
- Low silanol activity.
- Spherical particle shape.
- Parker-style endfitting type.
- Pore diameter of 90 Å.
- Solid core particle technology.
- USP Classification L1.
- Carbon load of 5.7 %.
- Designed to deliver excellent peak shape for basic analytes at low pH.
Waters Corp CORTECS HILIC Method Validation Kit, 90Å, 2.7 μm, 3 mm × 100 mm
CORTECS HILIC columns are high-efficiency columns based on a solid-core particle designed to retain highly polar analytes. They provide orthogonal selectivity compared to C18 columns.
- Chemistry: HILIC
- Separation mode: Hydrophilic interaction (HILIC)
- Particle substrate: Silica
- pH range: 1 to 5
- Maximum pressure: 18000 psi (1240 bar)
- Endcapped: No
- Silanol activity: High
- Particle shape: Spherical
- Particle size: 2.7 μm
- Endfitting type: Parker-style
- Pore size: 90 Å
- Format: Method validation kit
- Surface area: 100
- System: HPLC
- Particle technology: Solid core
- USP classification: L3
- Inner diameter: 3 mm
- Length: 100 mm
- Units per package: 3 pk